Fajar Metals is a reliable manufacturer and supplier of Monel K500 Bars, based in Jakarta, Indonesia. These high-performance bars are made from a nickel-copper alloy enriched with aluminum and titanium, which gives them remarkable mechanical strength, corrosion resistance, and wear resistance, even in tough marine and chemical settings. Monel K500 stands out for its superior toughness and hardness compared to Monel 400, making it perfect for demanding applications in oil & gas, aerospace, marine engineering, and chemical processing. Fajar Metals offers Monel K500 bars in various sizes and finishes, all compliant with international standards like ASTM B865 and ASME SB865.
Monel K500 Bars are composed of 63% nickel, 30–33% copper, along with trace amounts of aluminum (2.3–3.15%) and titanium (0.35–0.85%), which allow for precipitation hardening. This alloy shows significantly enhanced mechanical properties compared to Monel 400, boasting a tensile strength of up to 960 MPa and a yield strength of around 690 MPa, while still offering excellent ductility and toughness. Monel K500 is highly resistant to seawater, corrosive chemicals, chloride stress corrosion cracking, and high-temperature oxidation. Fajar Metals supplies these bars in either solution-annealed or age-hardened states, ensuring precise dimensional tolerances and outstanding surface finishes that are perfect for heavy-duty industrial applications.
|
Monel K500 Round Bar Specifications |
||
| Specifications | : | ASTM B865 / ASTM SB865 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size | : | 5 mm To 500 mm |
| Diameter | : | 0.1 mm to 100 mm |
| Length | : | 100 mm To 3000 mm Long & Above |
| Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Tolerance | : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
| Grade | C | Mn | Si | Cu | Fe | Ni | S |
| Monel K500 | 0.25 max | 1.5 max | 0.5 max | 27.00 – 33.00 | 0.5 – 2 | 63.00 min | 0.010 max |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 1,60,000 , MPa – 1100 | Psi – 1,15000 , MPa – 790 | 20% |
At Fajar Nickel Alloys, we take pride in being the largest supplier, exporter, and manufacturer of Monel k500 Bars in Jakarta, Indonesia, providing cutting-edge solutions for all your piping needs. Our state-of-the-art production plants are strategically located in the Indonesia, allowing us to maintain a vast inventory of over 16,000 tons of premium-quality materials readily available in stock. We are dedicated to delivering superior products and services, ensuring reliability and excellence for our global clientele.
Contact us to get a quick quote for your requirement.
Monel K500 Bars find extensive use in industries where high strength, durability, and corrosion resistance are essential. In the marine sector, they are perfect for pump shafts, seawater valves, and propeller shafts. The oil & gas industry relies on them for downhole tools, drill collars, and safety valves that face sour gas and extreme pressure. Chemical processing facilities utilize Monel K500 for agitator shafts, heat exchanger components, and reactors. In aerospace, you’ll find them in landing gear parts and high-load structural components. Fajar Metals is committed to providing Monel K500 bars that meet the highest standards.
